The tape bases are the most widespread kind of the base at building of garage from bricks. It is carried out directly under garage walls, in other words it is underground walls of garage or other structure. Can be both monolithic and modular. Monolithic it is produced from concrete or ferro-concrete. Modular, as a rule, are carried out from stones, bricks or ferro-concrete blocks.

The brick tape base.
This kind of base can be erected only in sandy grounds and you should use only red brick. The base laying is made just also as walls. Pay attention that it is desirable for such base to spend a waterproofing. And the bottom in certain cases is necessary for executing from monolithic concrete.

For all bases it is possible to prepare concrete yourself or to order it; use such solution for preparation of the tape bases:

Structure: 1 part of cement, 3 parts of sand, 4-5 parts of rubble. Water is added to a condition of a plastic mix, but not by the liquid.

Base waterproofing.
Base waterproofing in certain cases is a necessary measure, which will allow serving longer to the base and a whole garage. Thanks to modern technologies, for this day the waterproofing can be made very effective, I use various materials. Distinguish also waterproofing kinds, on such as horizontal and vertical.

The horizontal is carried out as a rule from rolled materials. Vertical usually becomes on a basis of materials that you smearing or gluing.

The smearing waterproofing, can be executed, using modern mastics, rubber mixes, and also it is polymeric, cheaper variants plaster a solution and special repair structures, also the quite good result can give cement-polymeric structures. These solutions are put on concrete designs of the base and protect them from influence of salts and chlorides. Pay attention that smearing waterproofing does not possess due elasticity and at the slightest breaking of concrete will lead to waterproofing infringement.

The gluing waterproofing is carried out by pasting of special rolled materials on an external surface of the base, applying thus waterproof mastic. Such isolation very qualitative, but before pasting is required surface thorough preparing: it is necessary to level, ground and to dry.

Getting waterproofing is used from the interior of the base, and it is carried out by means of cement mortals containing small quartz sand and active additives. After drawing of such solution, it gets into all cracks and a time and provides good hermetic sealing. The thickness of a layer usually makes 1-3 mm.

Rolled materials, it is possible to allocate two categories; these are traditional old, cheap materials and modern more high-priced. Accordingly newer rolled materials will provide the ideal protection, than traditional materials. Do not forget that all these waterproofing materials demand protection against mechanical damages; accuracy therefore is required at work with them.

If you need car garage – this site will help. Lots of samples of car garage products and direct access to the automobile garage sellers. All contact info on the site.

P.S. And don’t let laziness to stop you from finding the best deal about automobile garages. Don’t forget that we live in the world where info quickly enhances the quality of our life.

Due to this if you’re properly armed with the info in your topic you can be sure that you’ll always find the way out from any bad situation. So, please make sure to get back to this web site on a regular basis or – the easiest way to take care of it – sign up to its RSS feed. Thus you’ll have a direct shortcut to the latest info updates here. Blogs can be helpful, you just need to comprehend how to use them.

Share This